|
|
|
The following table defines some label sizes for various labels and printers.
Brother P2600 note: You can save some serious tape by going into the driver and setting the following; Right click on the Brother P2600 driver within Printers and select Properties. Click the Printing Preferences button. Set the Width to the width of your tape or you will get an error upon printing. We are using the 3/4" setting and 3/4" TZ tape. Set the Length to 1.7 inch. Orientation is Landscape. Click the Option button. Un-check the Auto Cut button. Click OK to close each of the windows and you are done. Remember that if you should change the tape width you must come to this driver & change the tape with again. |
Send mail to
rick@soaringsoftware.com with
questions or comments about this web site.
|